Posts flat
Just 8.2 mm thick when closed. Post it inside a padded envelope or box, as you would any card.
Techloch Card Mailer
A card mailer.
A display stand.
8.2 mmthick when closed
105°display angle
Design render in Ember / Ivory.
One 3D-printed case for a trading card in its toploader. Post or store it flat, then stand the lid in the base to display your card.
Toploader, sleeve and bag not included. Use a padded envelope or box for posting.
Techloch Card Mailer
Not yet available to order
Join the launch list
- 100 × 122 × 8.2 mmclosed size
- 2 partsbody and sliding lid
- 1 cardin its toploader
- 105°display angle
Made to be kept
From the post box to the top shelf.
Keep the case after delivery: use it to store your card or set it up as a display stand.
Stores flat
Keep a toploaded card in the closed case, tucked into a box or drawer.
Stands on the shelf
Stand the empty lid in the base, rest your toploader on the ledge and your card is on display.
- Post it flat
- Store it flat
- Stand it on the shelf
- Techloch Card Mailer
Rest the card on the ledge
Your toploader rests on the ledge in front of the lid.
Card display stand
On show the day it arrives.
The body becomes the base and the lid stands in two grooves, with a ledge for your toploader.
-
1. Open and set the card aside
Hold the case flat as you slide it open, then set your toploaded card aside.
-
2. Seat the empty lid
Lay the body flat and lower the lid into both grooves until it sits evenly.
-
3. Rest the card on the ledge
Stand your toploader on the ledge, facing out, and your card is on display.
Choose a level surface for your stand, and lift the card off before you move it or pack it away.
Fit guide
Will your toploader fit?
Toploaders differ between brands, so take a minute to measure yours fully loaded, with the card, sleeve, bag and seal in place.
Fits loaded holders up to
77.4 × 103 × 3.6mm
Width × length × thickness, including bag and seal.
See the full fit guide
- Load your holder
Sleeve your card and slide it into the toploader you plan to use.
- Include the bag and seal
Add the outer bag if you use one and seal it the way you normally would.
- Measure all three sides
Find the widest, longest and thickest points, then compare them with the size shown here.
A “35 pt” label describes the card a holder takes. Its outside dimensions can still vary, so go by your own measurements.
Techloch
Techloch Card Mailer
A rigid mailer and display stand for one toploaded card.
Not yet available to order
- 100 × 122 × 8.2 mmclosed
- Body + sliding lidPLA Matte
- One loaded toploadernot included
- 105° display anglelid stands in the base
Coming from Techloch
Card Mailer launch updates
Be first to order
Leave your email and we’ll let you know as soon as the Card Mailer is ready to order.
Custom branding
Your logo. Your Card Mailer.
Request a Techloch Card Mailer with your store’s logo and colours. For local game stores (LGS), card sellers and event organisers.
Start with your idea
Send us a few details to start the conversation:
- Your store or business name
- Your logo and preferred colours
- An estimated quantity and any timing in mind
Opens your email app. You can also email sales@techloch.com.au.
Which toploaders fit the Card Mailer?
The Card Mailer fits loaded holders up to 77.4 × 103 × 3.6 mm, bag and seal included. Toploaders vary by brand, so measure yours using the fit guide.
Will my 35 pt toploader fit?
A 35 pt label describes the card a holder takes, and outside sizes vary by brand. Measure your loaded holder and compare it with 77.4 × 103 × 3.6 mm.
Can I post a card in it?
Yes. The Card Mailer closes to 8.2 mm thick and holds one toploaded card. Post it inside a padded envelope or box.
The Card Mailer does not guarantee that your card or holder will remain undamaged during handling, postage, storage or display. Your Australian Consumer Law rights still apply.
How does the stand work?
The lid stands in two grooves in the base at 105 degrees, and your toploader rests on the ledge in front of it. Choose a level surface.
What comes in the box?
The body and the sliding lid, in Ember / Ivory. Toploader, sleeve and bag are not included.
About Techloch
Named after still water.
Techloch makes 3D-printed accessories for trading card collectors. The Card Mailer is our first, made so that the case your card travels in can also put it on display.
A loch is a Scottish lake, and ours lends the brand its colours of pale stone and last light. Each case is printed in small batches.
Techloch Card Mailer
Send it. Store it.
Show it.
One case for the post, the drawer and the shelf.